Entering route inspection results

Enter the results of the inspection into the system after the employee performs the inspection.

To enter route inspection results:

  1. Select Inspect > Route Inspection.
  2. Select the work order for which to enter inspection results, and then click the Inspection Results tab.
  3. Click Delete Record.
    Note: If you linked custom prompt fields with Inspection Result fields and entered a value for Aspect, the system displays the prompt fields on the last Inspection Result page.
  4. Specify this information:
    Equip
    Specify the equipment for which to enter inspection results.
    Note: The Equip lookup displays data that is in the organizations for which you have access permission.
    Aspect
    Specify the aspect to associate with this equipment
    PType
    Specify the point type to associate with the equipment.
    Point
    Specify the point to associate with the equipment.
  5. Choose one or both of these options:
    • The inspection result is qualitative

      For Find, specify the finding that relates to the inspection, or enter a Cmnt.

    • The inspection result is quantitative

      For Value, specify the inspection result.

  6. Specify this information:
    Method
    Specify the method of inspection for the selected inspection aspect.
    Result
    Select the reliability code for the inspection (this code is also used in regression analysis). Choose one of these options:
    • The measurement is acceptable

      Select Valid.

    • The measurement is wrong

      Select Invalid.

    • The inspection point has been changed so drastically that all previous inspection results for this point must be deactivated

      Select Discontinuity.

    Rating
    Select the confidence rating for the inspection results. Define confidence ratings on the Codes page of the Entities form (BNENTS) for the CRAT entity in Infor EAM.
    Completed
    Select to indicate that the inspection is complete.
    Slope
    Specify the slope for the inspection results.
    Loc
    Specify the location at which the inspection was performed.
    Cmnt
    Specify any additional information about the inspection results.
    Insptr
    Specify the person conducting the inspection.
    StdWO
    Specify either an existing standard work order or a PM schedule. The system generates the work order when the inspection results reach the critical value or tolerance.
    New WO Required
    Select to indicate that a new work order is required.
  7. Click Delete Record.
  8. Click Yes.